Gelenkanschluß, gebogen

Référence: 107/28

Raccord articulé droit

 Ball-linkstraightpack of 6

Référence: 890/49

Lagerplatte

Référence: 800/22

Béquille noire

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Référence: 870/31

Strebenanschluß-Hülse

Référence: 310/8

Support de résonateur 70 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Référence: 800/21

Béquille jaune

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Référence: 800/6

Kit empennage jaune

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Référence: 800/25

Kit empennage, grand

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Référence: 890/5

Kufenauflage

Référence: 830/6

RC-Vorbau

Référence: 260/2

Support de empennage et tirants

Tail fin and strut holder XLV.

Référence: 7/10

Boutonnières pour la salle de réunion 3 x

 Content of the package2 pieces

Référence: 870/16

Leitwerkadapter, 2-teilig

Référence: 834/41

Toothed belt, XL/190

Toothed belt for BENZIN Acrobatic.

Référence: 800/24

Kit empennage, grand

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Référence: 126/2

Skid reinforcement, carbon fibre

Not available