Strebenanschluß-Hülse

Référence: 800/50

Empennage 3-D en fibre de carbone

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...

Référence: 870/40

Edelstahl-Trägerrohre 8 mm

Référence: 870/4

Querverbinder, GFK

Référence: 890/49

Lagerplatte

Référence: 870/41

Untere Edelstahl-Träger 8 mm

Référence: 860/31

Strebenanschluß-Hülse

Référence: 30/7

Strut set fibra de carbono 8 x 200 mm

Référence: 7/6

Ecrou moleté M3

 Content of the package4 pieces

Référence: 310/8

Support de résonateur 70 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Référence: 870/7

Heckrohrhalter, Alu

Référence: 260/38

Tirant pour moteur

Strut for motor, XLV.

Référence: 860/10

Streben-Set, CFK

Référence: 860/11

Heckrohrhalter, 2fach kugelgelagert

Référence: 800/5

Kit empennage rouge

Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight

Référence: 800/21

Béquille jaune

Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!

Référence: 831/6

Adapter für Vorbau Benzin-Trainer