PTFE-Abgasrohrverbinder 20x2,5x100mm

Référence: 64/52

Tige embout 6-pans seule, 150 mm

Component part for the starter extension; see Ord.No. 64/46 resp. 64/50.

Référence: 4305

Bougie froide

hot engine - cold plug (Summer) cold engine - hot plug (Winter)

Référence: 67/47

Mutter 5/16" 24 UNF, WE P5 + 4Takt

Référence: 116/97

Flexible 120 mm

 Content of the package1 piece

Référence: 871/35

Moyeu fixe pour AC entraîné, droite

 Content of the package1 piece

Référence: 64/66

Luftschrauben-Set

Référence: 870/45

Kit entretoises X-Treme mécanique gauche

 Content of the package4 x 16.8 mm4 x 27.9 mm4 x 33.5 mm

Référence: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Référence: 870/36

Roue libre X-Treme, 10 mm

 Content of the package1 piece

Référence: 870/54

Support rouleaux de guidage X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Référence: 67/44

Nut, M 8

 Content of the package1 piece

Référence: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Référence: 64/50

Rallonge de démarrage, tige 150 mm

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Référence: 28/11

Cordon silicone pour bougie

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Référence: 115/5

Tube PTFE 20 x 2,5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Référence: 7/68

Startadapter, GFK