Alu-Heckrohr 20 x 0,8 x 780 mm, schwarz

Référence: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Référence: 17/68

Mittenlagerungs-Set 25 mm

Référence: 800/38

Führung für 25 mm Heckrohr

Référence: 722/13

Poutre AC 25 x 0,8 x 1055 mm

 Aluminium tail boom0.8 mm wall thickness25 mm outside Ã��ballraced for 8 mm Ã��stainless steel drive shaft

Référence: 834/70

Support de poutre, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Référence: 120/13

Tail boom 25 x 1100 mm

Not available

Référence: 313

Tube AC 20 x 0,5 x 790 mm, noir

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Référence: 800/30

Heckrotorhalter

Référence: 17/19

Mittenlagerungs-Set 20 mm - 3 Stück

Référence: 21/5

CFK-Steuerstange 4,0 x 1350 mm

Référence: 49/1

Glocke mit Stellring

Référence: 17/15

Stainless steel tube 6 x 890 mm

Stainless steel tube 6.0 x 0.3 x 890 mm

Référence: 21/4

Pushrod - CFK 4.0 x 1000 mm carbon fibre

Référence: 304/5

Tail boom 20 x 0.8 x 780 mm incl. ball bearings

Not available

Référence: 314

Tube AC 25 x 0,8 x 790 mm, violet

Tail boomdimensions: 25 x 0.8 x 790 mmblack

Référence: 830/13

Poutre AC 20 x 0,8 x 810 mm titane avec roulements

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øballraced for 6 mm Ø stainless steel drive shaft, 17/16