Zahnrad 8 mm, 22 Zähne

Référence: 870/6

Gyro plate GFK, X-Treme

Not available

Référence: 833/44

Toothed belt pulley 55-tooth 3M

Toothed belt pulley 55-tooth.

Référence: 809/200

SkyFox side frames with cooling duct

Not available

Référence: 870/51

Rear vertical frame, X-Treme

Not available

Référence: 870/52

longitudinal carrier, GFK

Not available

Référence: 870/50

Front vertical frame, X-Treme

Not available

Référence: 809/51

SkyFox right side frame

Not available

Référence: 44/70

Couronne 65 dents

Gear 65-tooth Delrin

Référence: 41/25

Pinion shaft 16.5 mm - for AR

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft with 16.5 mm gear depthsolely for the use with the freewheel bell Ord.No. 36/40or with the hub bell Ord.No. 36/45The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for...

Référence: 870/73

Side plate X-Treme, CFK

Not available

Référence: 4/30

90° Nippel mit Zollgewinde

Référence: 870/2

RC frame, GFK, for X-Treme

Not available

Référence: 41/15

Pinion shaft for 12 mm gear

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft for 12 mm gears The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for auto-rotation landings; fitting does not require the gearbox to be dismanteled.

Référence: 251/200

Kit for lowering the tail output, X-Treme

When the X-Treme mechanics are mounted in certail fuselage such as Agusta, UH-1D or Dauphin, the tail output needs to be lower. This kit lowers the tail output.

Référence: 871/2

Servo plate CFK for throttle Servo, X-Treme

Not available

Référence: 44/58

Couronne 52 dents

The combination of 52 : 32 teeth is used for the Sky Fox Boxer model, driven by a 4-stroke boxer motor with 2 x 13.26 cc capacity. 2-stroke glow plug engines (which are fitting our models because of performance and dimensions), don't achieve a satisfying result with this gear ratio.The illustration shows a symbol with the number of teeth of the main gear....