SkyFox side frames with cooling duct

Référence: 4/30

90° Nippel mit Zollgewinde

Référence: 4/7

Mechanics mount, X-Treme

Not available

Référence: 870/73

Side plate X-Treme, CFK

Not available

Référence: 809/51

SkyFox right side frame

Not available

Référence: 41/15

Pinion shaft for 12 mm gear

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft for 12 mm gears The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for auto-rotation landings; fitting does not require the gearbox to be dismanteled.

Référence: 44/70

Couronne 65 dents

Gear 65-tooth Delrin

Référence: 44/10

Couronne 55 dents, seule

Gear 55-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 870/53

Bearing plate, GFK

Not available

Référence: 44/52

Couronne 52 dents

Gear 52-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 44/9

Main gear hub

Not available

Référence: 47/10

Spacer 7 x 13 x 5 mm

Spacer 7 x 13 x 5 mm

Référence: 870/50

Front vertical frame, X-Treme

Not available

Référence: 41/25

Pinion shaft 16.5 mm - for AR

The pinion shaft (shaft and integral spur gear) is one link in the transmission which transfers the engine's power to the main rotor.Pinion shaft with 16.5 mm gear depthsolely for the use with the freewheel bell Ord.No. 36/40or with the hub bell Ord.No. 36/45The length of both pinion shafts is ideal for the optional installation of a driven tail rotor for...

Référence: 44/54

Couronne 54 dents

Gear 54-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Référence: 870/51

Rear vertical frame, X-Treme

Not available

Référence: 1006/9

Main gear box with freewheel

If you require a driven tail rotor for auto-rotation, the main gear hub must be fitted with a freewheel; the freewheel on the main rotor shaft then needs to be replaced by a fixed hub mounted on the main rotor shaft.Main gearbox incl. freewheel for driven tail rotor for auto-rotation landings; kit-form. The pinion shaft 41/25 supplied is only suitable for...