

Keine Marke
Política de seguridad
Política de envío
Política de devolución
Aktuell keine Kunden-Kommentare
Riferimento: 830/68
Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.
Riferimento: 13/32
The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.
Riferimento: 3720
This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.
Riferimento: 791/27
The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.
Riferimento: 26/70
Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...
Riferimento: 3741
Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.
Riferimento: 830/83
Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems!