Tank 540 ccm für Benzin

Reference: 10/67

Kraftstoff-Filter für Methanol

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 26/34

Petrol / kerosene hose clamp

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Reference: 13/32

Kerosene refuelling system

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Reference: 26/2

Rubber cap

Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4

Reference: 791/26

Kerosin Tank 1.5 l, Turbine Cobra

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Reference: 830/24

Fuel tank nipple with bend, M5

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Reference: 800/26

Tank 540 ccm für Methanol

Reference: 830/27

Tank 540 ml for kerosene

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Reference: 116/5

Fuel tank nipple / Pressure nipple M 5

Content of the packag: 1 piececomplete as shown

Reference: 3740

Kerosene fuel station, 10 l.

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Reference: 791/27

Internal fueltank for Cobra, 2.2 l.

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Reference: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Reference: 13/27

Carenado de la válvula de llenado

Reference: 830/82

Petrol / kerosene tubing 1 m

Not available

Reference: 10/82

Schlauch für Methanol 1 m