

Keine Marke
Política de seguridad
Política de envío
Política de devolución
Aktuell keine Kunden-Kommentare
Riferimento: 13/32
The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.
Riferimento: 3740
Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.
Riferimento: 26/25
Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.
Riferimento: 26/34
Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...
Riferimento: 26/2
Rubber cap useful to seal fuel lines on the pit box or fuel tank nipples pack of 4
Riferimento: 412/26
dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)
Riferimento: 641/26
Component part for fuselage Air-Crane, Ord.No. 6410
Riferimento: 791/27
The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.