Unidad de respotaje para queroseno 10 l

Reference: 830/68

Fine-mesh petrol and kerosine filter

Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.

Reference: 830/24

Fuel tank nipple with bend, M5

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Reference: 26/25

Tank vent filter

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Reference: 830/26

Tank 540 ml for petrol

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Reference: 26/12

Tankpendel 2 x 4 mm für Methanol

Reference: 26/30

Felt clunk pick-up

Felt clunk pick-up 16 Ø x 26 mmfor bubbles-free suck up and constant flow ofpetrol and kerosene

Reference: 641/26

Tank for Air-Crane, GRP, turbine version

Component part for fuselage Air-Crane, Ord.No. 6410

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 26/3

Tank 300 ccm für Methanol/Benzin

Reference: 800/26

Tank 540 ccm für Methanol

Reference: 26/20

Pendelsieb für Methanol

Reference: 13/28

Tanknippel für Benzin/Kerosin/Methanol

Reference: 26/5

Tank for Kerosene 1.25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Reference: 3725

Kraftstoffbehälter 2,5 Liter Tank

Reference: 830/83

Petrol fuel tubing 1 m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Reference: 13/25

Válvula de llenado para metanol y bencina