Filtrer par

Motorisation

Motorisation

Disponibilité

Disponibilité

Poids

Poids

  • 0Kg - 10Kg

Prix

Prix

  • 0,00 € - 18 400,00 €

langage

langage

Type de rotor

Type de rotor

Motorization

Motorization

Catégories

Catégories

Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 4961 produits.

Affichage 2077-2088 de 4961 article(s)

Filtres actifs

Référence: 143

Floats

Commentaire(s): 0

Only experienced pilots should attempt to use floats for landings on all types of water.By no means we suggest that a beginner tries this!If floats are used as "airbags" in the beginning to avoid hard landings on the ground and to absorb the impact, this helps some pilots to succeed in overcoming their first uncertain flights.Detailsapprox.: 800 mm...

Prix 160,70 €
Détails
En vente sur demande

Référence: 89/7

Tringle coudée 3,0 x 152 mm

Commentaire(s): 0

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Prix 14,70 €
Détails
En vente sur demande

Référence: 2005.s

Bell 222 1:8 - Fuselage kit

Commentaire(s): 0

The Bell 222 from VARIO is a 650 size scale helicopter. You can power this remote-controlled model helicopter with electric propulsion. Striking is the streamlined design and high-profile wing stubs. These provide additional lift in forward flight and serve as a housing for the retractable landing gear. Compared to other helicopters the tail boom is...

Prix 594,30 €
Détails
En stock

Référence: 68/54

Swashplate 5-blade, 12 mm

Commentaire(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point.

Prix 160,70 €
Détails
En vente sur demande

Suivez-nous sur Facebook