Riferimento: 10/51

Dust guard cover 42 mm

To protect your engine effectively against dust you should close the exhaust port after unscrewing the manifold with a dust guard cover at once.Dust guard cover pack of 2 42 mm hole spacing

Riferimento: 64/42

pinion gear 20-tooth

Clutch pinion gearincl. flywheel and split taper collet20-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Riferimento: 802/56

Flywheel bush

Riferimento: 116/27

Flex hose set

 Flex hose setOverall length approx. 270 mm

Riferimento: 115/61

Stainless steel manifold 42 mm

The various exhaust manifolds differ in shape and in the size of the flange, to match different engines' exhaust stubs. The term "exhaust hole spacing" refers to the holes on either side of the exhaust port, measured between hole centres. Please check before you order that you have selected the correct manifold to match your model and engine. Measure...

Riferimento: 116/100

Tuned pipe silencer

 Tuned pipe silencerfor 23 cc petrol enginesoverall length 410 mmweight approx. 250 gconnection-Ø 20 mmtail pipe length 110 mm

Riferimento: 244505

Zylinderkopfdichtung R50 8,5ccOrd.No. 244505

Riferimento: 64/21

bell pinion gear 22-tooth

Clutch bell pinion gear22-toothmodule 1material: GRPtwin ballracedincl. clutch liningfits the glow plug motor clutch

Riferimento: 67/46

Hexagon insert for starter adaptor

Riferimento: 116/34

Flex hose set

 Flex hose setoverall length approx. 200 mm

Riferimento: 275/59

Motor mount for XLC Compact, 1002/77 and 1002/78

Not available

Riferimento: 310/1

Tuned pipe holder 25 mm

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Ord.No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 25 mm Ø tail boom