Riferimento: 703/35

3 pale del rotore principale di 10 mm, la radice di 5 mm

Not available

Riferimento: 70/76

Aste 3,0 x 75 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Riferimento: 70/101

Aste 3,0 x 100 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Riferimento: 702/70

Scala semi-rotore

This semi-scale rotor head includes additional mixing of the blade holder actuator linkage at a ratio of 2 : 1. This results in well-balanced flying characteristics, and the model has a damped rather than direct response to your control inputs (resembling a 2-blade head with flybar).Use only the suggested rotor blades for flybar-less rotor heads,...

Riferimento: 702/60

Rotore a 2 pale rigide 10 mm

CSS stands for Cyclic Speed System at this rotor head because the cyclic control occurs more spontaneous.As, for example, a Jet Ranger or an AIRWOLF requires a true-scale look in the air, a rotor head without a flybar is part of the scale detail for these helicopters. Because of its exact reactions in flight we recommend this CSS rotor head.Only the...

Riferimento: 70/160

Aste 2,5 x 160 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Riferimento: 704/30

Testa del rotore a 4 pale 10 mm

drilling ø 8 mm

Riferimento: 70/60

Aste 2,5 x 60 mm

Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Content of the package: 1 piece

Riferimento: 703/38

Testa del rotore a 3 pale da 12 mm, -20

Not available

Riferimento: 70/91

Aste 3,0 x 90 mm

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Riferimento: 89/7

Pushrod acodado, 3,0 x 152 mm

On 2-blade rotor heads with flybar the angled pushrods connect the pitch compensator with the control bridge.Ready-made pushrod, threaded M 2.5, approx. 8 mm thread length each end. Pack of 2

Riferimento: 703/43

Testa del rotore a 3 lame f, 20 kg 12 mm +