Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotor head centre piece, rigid

72/22
Valutazione 

Aluminium centre piece, rigid, for 12 mm main shaft

108,30 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

Aluminium centre piece, rigid, for 12 mm main shaft

Dettagli del prodotto
72/22
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotor head centre piece, rigid

Rotor head centre piece, rigid

Aluminium centre piece, rigid, for 12 mm main shaft

Scrivi la tua recensione
16 autres produits dans la même catégorie :
Rotor cap for Multi blade head Aperçu rapide

Référence: 707

Rotor cap for Multi blade head

Commentaire(s): 0

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Prix 30,60 €
Détails
En vente sur demande
Flybar stainless steel 4 x... Aperçu rapide

Référence: 79

Flybar stainless steel 4 x 450 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 17,00 €
Détails
En vente sur demande
Joint torique 9 x 4.5 mm Aperçu rapide

Référence: 832/74

Joint torique 9 x 4.5 mm

Commentaire(s): 0

O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 13,50 €
Détails
En vente sur demande
GRP blade holder, 5 mm ∅ hole Aperçu rapide

Référence: 76/19

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with short linkage armfor multi-blade rotor heads

Prix 30,60 €
Détails
En vente sur demande
Mixer lever set, aluminium Aperçu rapide

Référence: 78/45

Mixer lever set, aluminium

Commentaire(s): 0

These mixer levers from aluminium are particularly torsion proof and feature an improved control precision. For individual settings you can change the connection of the linkage (relocate the balls).Flanged bearings 3 x 7 x 3 mm are suitable also, i.e. you use existing ballraces again.Place of installation: all rotor heads which are provided with the...

Prix 54,60 €
Détails
En vente sur demande

Seguici su Facebook

Facebook