Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Rotor brake

722/9
Valutazione 

The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.

The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed during the flight.

The rotor brake only serves to stop an already slowing down rotor head in low rotor speed conditions.
An appropriate servo is supplied with the kit.

396,50 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione

The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.

The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed during the flight.

The rotor brake only serves to stop an already slowing down rotor head in low rotor speed conditions.
An appropriate servo is supplied with the kit.

Dettagli del prodotto
722/9
Documenti Allegati
Scarica
722/9

Scarica (568.89k)
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Rotor brake

Rotor brake

The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.

The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed during the flight.

The rotor brake only serves to stop an already slowing down rotor head in low rotor speed conditions.
An appropriate servo is supplied with the kit.

Scrivi la tua recensione
16 autres produits dans la même catégorie :
Reinforced freewheel bell... Aperçu rapide

Référence: 36/40

Reinforced freewheel bell compl.

Commentaire(s): 0

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Prix 131,70 €
Détails
En vente sur demande
R. H. conversion set X-Treme Aperçu rapide

Référence: 870/200

R. H. conversion set X-Treme

Commentaire(s): 0

For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.

Prix 269,70 €
Détails
En vente sur demande

Seguici su Facebook

Facebook