Side frame right

Référence: 57/1

Douille 3 x 5 x 6,5 mm

for Ord.No. 57/10 and 58/10Pack of 2

Référence: 260/53

Plancher pour mécanique XLV

Base plate XLV.

Référence: 94/4

Douille 6 x 7 x 17,5 mm

 Bush 6 x 7 x 17.5 mmpack of 1

Référence: 47/11

Spacer 8 x 16 x 5 mm

 Content of the package1 piece

Référence: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Référence: 57/20

Pitch-axis crank set

 Content of the packagecomplete as shown

Référence: 107/44

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.

Référence: 722/54

Bearing support 21 mm

Not available

Référence: 260/50

Side frame XLV

Side frame XLV. The two side frames are identical in size an shape. Content of the package: 1 piece.

Référence: 53/19

Dome fittings set for PHT3-L

Dome fittings set for JetCat PHT3-L turbine

Référence: 107/12

Balls chrome-plated 2.0 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Référence: 607/53

Set plato ciclico BO 105 T-Rex

Référence: 414/53

Dome fittings set Bell 412 with PHT3-3 turbine

Not available

Référence: 53

Dome plate GRP

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Référence: 37/16

Housing cover aluminium

Not available

Référence: 42/18

Bevel gear 6 mm, 19-tooth

 Bevel gear6 mm Ømodule 0.719-tooth