Tubo flessibile 12 x 100 mm

Reference: 16/2

Silencer paint, black

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Reference: 67/43

Starter adaptor for 1/4" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Reference: 116/17

Flex hose screw fittings set

  Content of the package complete as shown

Reference: 870/54

Belt tension roller bearer, X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Reference: 115/5

PTFE pipe 20 x 2.5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/45

Nut, 1/4" 28 UNF

 Content of the package1 piece

Reference: 64/66

Luftschrauben-Set

Reference: 870/45

Bush set X-Treme mechanics LH

 Content of the package4 x 16.8 mm4 x 27.9 mm4 x 33.5 mm

Reference: 67/44

Nut, M 8

 Content of the package1 piece

Reference: 870/48

Alu-Lagerplatte

Reference: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Reference: 870/36

Freewheel for X-Treme, 10 mm

 Content of the package1 piece

Reference: 116/2

Spring clip for PTFE tube

 Spring clippack of 2for mounting PTFE pipes 115/11

Reference: 28/13

Contact socket gold-plated

 Content of the package1 piece

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 7/68

Startadapter, GFK