Fusoliere
Trainer
- Cam & Carrier
- Trainer a benzina
- Ricambi e Accessori
Meccaniche e accessori
- Meccaniche a benzina
- Meccaniche elettriche
- Meccaniche a turbina
- Meccaniche a metanolo
  - Meccaniche
  - Ricambio di Gearbox Principale
- Ricambi/accessori per meccaniche
- Conversione in elettrico
  - Petrol
  - X-Treme
- T-Rex Accessori
Accessori in scala
- Rivetti
- Accessori Interni
- Accessori esterni
- 3/4/5/6 Pale
- Modelli Specifici
Motori e Accessori
- Kit motorizzazione elettrica
- Motori a benzina e accessori
- Motori Glow e Accessori
- Turbines
- Scarichi per Turbine
- Alberi principali
- Guarnizioni e Giunti
- Motores O.S.
- Serbatoi e accessori
Transmision/Engranajes
- Engranajes modulo 1
- Engranaje Exterior Módulo 1,5
- Caja de cambios
- Correas y Engranajes
- Engranaje interior
Teste rotore, Pale, e Accessori
- Rotore a 2 pale
- Aste comando
- Uniball
- Accessori
Rotore di coda e accessori
- Rotori di coda
- Piatto Oscillante i Accessori
- Rotore a 2 pale
- Control Bridges
- Palini rotore di coda
- Fenestron
- Giunti
- Tail Rotor Hubs
- Ricambi e Accessori
- Alu-Tuning for 6 mm tail rotor
Pale rotore principale
- Accessori
Attrezzi / Colle / Lubrificanti
- Chiavi
- Filiere e punte
- Pinze e cutters
- Chiavi esagonali
- Attrezzi per il set-up
- Chiavi speciali
- Attrezzi per il montaggio
- Files, Perma Grit
- Attrezzatura specifica
Ricambi Fusoliere
- Adesivi
- GRP Parti
- Carrello Atterraggio
- Guidare di Coda
- Set Finestra / Cabina
- Oggetti in Legno
- Pallettizzato di Coda
- Accessori
Elettronica
- Servi e accessori
- Telecomando
  - Radiocomandi
    - Pulpiti per trasmittenti
    - Accessori
  - Accessorio
- Batterie e caricabatterie
- Electronics, Measurement
- Fijaciones Varias
- Simulatori di Volo IKARUS
Colle e lubrificanti
- Colle
- Smacchiatore
- Lubrificanti
- Accessori
Cuscinetti / Giunti / Accessori
- Cuscinetti
- Viteria
- Dadi
- Key and Keyway
- Attrezzi
  - Pasadores de acero
  - Pernos huecos
- Misc Fixings
Abbigliamento / Idee regalo
- Abbigliamento
- Adesivi / Patches
- Idee Regalo
Built models ((A)RTF)
Sale
Novità
Mezzi movimento terra
- Escavatori Deere/Zaxis 1:12 & 1:
- Dumper Bell B40D & Bell 50D
- Pala Gommata
- Bulldozer
- Set foto
- Idraulica
- Componenti / Accessori
- Parti Scala
- Componenti del modello
Offerte Speciali
New products
Modelado 3D
- Lama SA 315 1:4
- Bell 47-G 1:4

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

14,70 €

Più

In vendita su richiesta

Anteprima

Riferimento: 125

12 mm sliding bar

Recensioni: 0

22,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 90385

Tornillo prisionero M 4 x 4 flat

Recensioni: 0

4,00 €

Più

In vendita su richiesta

Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

6,30 €

Più

In vendita su richiesta

Anteprima

Riferimento: 2017E

Catalogo Vario 2017

Recensioni: 0

5,80 €

Più

In vendita su richiesta

Tutte le migliori vendite

Bell 47 G III

Riferimento 4700.e

Valutazione

The Bell 47 G III from VARIO is a 1050 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Bell Aircraft Corporation is the creator of the man-carrying version.

For VARIO's 1050 Bell 47 G 3 we recommend a main rotor speed of approx. 900 rpm. Electric drive sets from VARIO are already tuned to this head speed.

Select one of the following drive types:

Motorizzazione

electrico
Benzin

2.005,90 €

Tasse incluse

Quantità

In magazzino

Política de seguridad

Política de envío

Política de devolución

Descrizione

For VARIO's 1050 Bell 47 G 3 we recommend a main rotor speed of approx. 900 rpm. Electric drive sets from VARIO are already tuned to this head speed.

Select one of the following drive types:

Dettagli del prodotto

Riferimento 4700.e

Scheda tecnica

scala: 1:4
lunghezza: 2370 mm
peso: ca. 13,5 kg
larghezza: 760 mm
Altezza: 550 mm
Diametro del rotore: 2360 mm

Documenti Allegati

Scarica

4700

Scarica (1.15M)

Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Bell 47 G III

For VARIO's 1050 Bell 47 G 3 we recommend a main rotor speed of approx. 900 rpm. Electric drive sets from VARIO are already tuned to this head speed.

Select one of the following drive types:

Scrivi la tua recensione

Quality

Titolo della recensione^* La tua recensione^*

o Annulla

^* Campi richiesti

Potrebbe anche piacerti

Anteprima

Riferimento: 470/6

Canopy per Bell 47 G III, trasparente, con due sportelli

Recensioni: 0

Bell 47 G III canopyclearpre-trimmedwithout GRP parts

193,20 €

Più

In vendita su richiesta

Anteprima

Riferimento: 3307

Motorino di avviamento elettrico per Benzin Eléctrica, 12S

Recensioni: 0

For the conversion of benzin mechanics to electric

982,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 3308

Set motore elettrico per Benzin meccanico elettrico

Recensioni: 0

For the conversion of benzin mechanics to electric

982,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 1005/47

Testa rotore per Bell 47

Recensioni: 0

This rotor head was modelled as closely as possible on the original version installed on the Bell 47 G full-size helicopter. It is an excellent choice for use on the Bell 47 G III model, Ord. No. 4700.The centrifugal weights and springs are dummies, and do not work. The rotor blade swivel limits are also imitations, and have no function.The blade grips...

618,40 €

Più

In vendita su richiesta

Anteprima

Riferimento: 330/5

Set accessori portelli per Bell 47 G III, Lama

Recensioni: 0

Door fittings for large-scale model helicopters do not differ fundamentally from one type to another. However, the size of these accessories is important if the model is to look convincing, otherwise they will look out of scale.Compare the door handle of the Lama with that of the Alouette II, and the difference is obvious.The door fittings set for the...

46,10 €

Più

In vendita su richiesta

Anteprima

Riferimento: 470/1

Skid landing gear for Bell 47 G III

Recensioni: 0

Not available

108,30 €

Più

In vendita su richiesta

Anteprima

Riferimento: 470/22

Bell 47 Mechanics

Recensioni: 0

This mechanical system has been developed specifically for the Bell 47 G III, so that the model helicopter can be fitted with a VARIO G230 petrol engine.The mechanics is designed for a 2-blade main rotor.Without motor and petrol components (see Ord.No. 26/100).

1.922,30 €

Più

In vendita su richiesta

Anteprima

Riferimento: 413

2-blade-set 2360 mm

Recensioni: 0

Specification 2-blade-set length: 1050 mm rotor disc: 2360 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 11 mm weight: ca. 450 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

380,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 68/50

Swashplate driver 12 mm

Recensioni: 0

Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

99,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 34/32

Tail rotor blades 156 mm, grey

Recensioni: 0

Tail rotor blade, rotor disc 390 mm ØSpecification 8.0 mm blade root16.5 g approx.45.5 mm blade chordGRP6.7 mm profile thicknesssymmetrical156 mm longbalanced1 pairThe tail rotor blades are designed exclusively for use with the specified VARIO mechanics in conjunction with the tail rotor 1003/80. The maximum rotational speed of the tail rotor shaft is...

99,90 €

Più

In vendita su richiesta

Anteprima

Riferimento: 1/49

Pilot William 1:4, green long sleeve + trousers

Recensioni: 0

Pilot William 450 mm Scale 1:4 green long sleeve top + trousers Made in Germany

118,40 €

Più

In vendita su richiesta

Anteprima

Riferimento: 995

RC system accessories incl. 5 servos

Recensioni: 0

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

529,90 €

Più

In vendita su richiesta

16 andere Artikel in der gleichen Kategorie:

Vorschau

Artikel-Nr.: 2001.s

Bewertungen: 0

2.647,10 €

Mehr

Auf Lager

Vorschau

Artikel-Nr.: 1006.s

JetRanger III 1:6.5 - Fuselage kit

Bewertungen: 0

Der "kleine JetRanger" von VARIO ist ein Scale Heli in der 650er Größe. Sie können den ferngesteuerten Modellhubschrauber mit Elektro Antrieb fliegen. Bell Helicopter ist Urheber der manntragenden Version. Der legendäre Bell 206B Jet Ranger III ist einer der erfolgreichsten Hubschrauber, der jemals gebaut wurde. Er fliegt in allen Klimazonen, in der...

559,40 €

Mehr

Verkauf auf Anfrage

Vorschau

Artikel-Nr.: 3300.e

Lama SA 315 B 1:4 - Fuselage kit

Bewertungen: 0

Die "große Lama" von VARIO ist ein Scale Heli in der 1150er Größe. Sie können den ferngesteuerten Modellhubschrauber mit Benzin, Turbine oder Elektro Antrieb fliegen. Aérospatiale ist Urheber der manntragenden Version. Die Stabilität der beweglichen Türen, die eine Größe von 340 x 310 mm haben, wird durch Falze im GFK-Rumpf erreicht. Der Heckausleger...

2.642,20 €

Mehr

Verkauf auf Anfrage

Vorschau

Artikel-Nr.: 2040.e

Bell 204 UH-1B 1:7 - Rumpfbausatz

Bewertungen: 0

Die "UH-1B" von VARIO ist ein Scale Heli in der 800er Größe. Sie können den ferngesteuerten Modellhubschrauber mit Benzin oder Elektro Antrieb fliegen. Bell Helicopter ist Urheber der manntragenden Version. Entsprechend dem Vorbild hat auch das Modell eine außergewöhnlich lange Rotorwelle. Im Vergleich zur Bell 205 ist die Zelle der 204 kürzer. Für die...

717,40 €

Mehr

Auf Lager

Vorschau

Artikel-Nr.: 7022.e

Robinson R22 1:4 - Fuselage kit

Bewertungen: 0

The Robinson R22 from VARIO is a 950 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin) or electric propulsion. Robinson Helicopter is the creator of the man-carrying version and produces this helicopter. In this new version of our popular R22 we have used the mechanics from our Bell 47. This has moved...

1.187,80 €

Mehr

Verkauf auf Anfrage

Vorschau

Artikel-Nr.: 9042.t

Hughes 500D 1:5 - Fuselage kit

Bewertungen: 0

Die "große Hughes 500D" von VARIO ist ein Scale Heli in der 850er Größe. Sie können den ferngesteuerten Modellhubschrauber mit Benzin, Turbine oder Elektro Antrieb fliegen. Hughes Helicopters ist Urheber der manntragenden Version und das Boeing Tochterunternehmen McDonnell Douglas stellt diesen Helikopter bis heute her. Die Hughes 500E hat eine spitze...

1.109,40 €

Mehr

Verkauf auf Anfrage

Vorschau

Artikel-Nr.: 2050.e

Bell 205 UH-1D 1:7 - Rumpfbausatz

Bewertungen: 0

Die "UH-1D" von VARIO ist ein Scale Heli in der 800er Größe. Sie können den ferngesteuerten Modellhubschrauber mit Benzin oder Elektro Antrieb fliegen. Bell Helicopter ist Urheber der manntragenden Version. Entsprechend dem Vorbild hat auch das Modell eine außergewöhnlich lange Rotorwelle. Im Vergleich zur Bell 205 ist die Zelle der 204 kürzer. Für die...

907,10 €

Mehr

Auf Lager

Vorschau

Artikel-Nr.: 1450.e

H145 (EC145) 1:6 - Fuselage kit

Bewertungen: 0

The H145 from VARIO is a 800 size scale helicopter. You can power this remote-controlled model helicopter with gasoline (benzin), turbine or electric propulsion. Eurocopter is the creator of the man-carrying version and Airbus Helicopters produces this helicopter. For VARIO's 800 EC145 we recommend a maximum main rotor speed of 1350 rpm. Electric drive...

1.026,80 €

Mehr

Verkauf auf Anfrage