Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Specchietti retrovisori esterni

340/40
Valutazione 
Mirror set, complete as illustrated
e.g. for Lama and other large-scale models
dimensions of the mirrors: approx. 40 x 84 and 14 x 22 mm
75,60 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione
Mirror set, complete as illustrated
e.g. for Lama and other large-scale models
dimensions of the mirrors: approx. 40 x 84 and 14 x 22 mm
Dettagli del prodotto
340/40
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

Specchietti retrovisori esterni

Specchietti retrovisori esterni

Mirror set, complete as illustrated
e.g. for Lama and other large-scale models
dimensions of the mirrors: approx. 40 x 84 and 14 x 22 mm
Scrivi la tua recensione
16 autres produits dans la même catégorie :
Transmission factice Aperçu rapide

Référence: 340/13

Transmission factice

Commentaire(s): 0

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Prix 133,60 €
Détails
En vente sur demande
Turbine factice GFK Aperçu rapide

Référence: 330/2

Turbine factice GFK

Commentaire(s): 0

The dummy turbine provides the ideal starting point if you wish to install additional scale fittings on your Lama.The dummy turbine is assembled from six separate GRP mouldings, and fits all models with VR-22 mechanics installed.In the turbine-powered version of the Lama the actual turbine is located in this position.GRP dummy turbineLength approx. 490 mm

Prix 141,80 €
Détails
En vente sur demande
Extincteur, longueur env.... Aperçu rapide

Référence: 30/50

Extincteur, longueur env. 70 mm

Commentaire(s): 0

Fire extinguishers in the cockpit are mandatory for any scale model helicopter, since the full-size machines are also required to carry them.Our fire extinguisher is available in two different sizes, and it can be mounted in the cockpit in a wide variety of positions.For models up to 2000 mm rotor diameter we recommend the smaller version; the bigger one...

Prix 30,60 €
Détails
En vente sur demande
Couvercle Ø 90 mm Aperçu rapide

Référence: 350/17

Couvercle Ø 90 mm

Commentaire(s): 0

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...

Prix 50,50 €
Détails
En vente sur demande

Seguici su Facebook

Facebook