Rueda de ventilador Lama 1: 4

Riferimento: 341/417

Specchio Grande, Lama 1:4

dimensions: 4 x 5.4 x 1 cm

Riferimento: 340/29

Cockpit for Lama, turbine version

Riferimento: 341/415

Llamada de rescate por radar x2 1: 4

Riferimento: 340/6

Pedana di salita per Lama

If you have a mind to continue adding detail fittings to your Lama, you are sure to appreciate this landing gear step which can be fitted to an existing model at any time. The step is made of stainless steel, and is supplied complete with clips, screw fittings and tread material. Entry step, for Lama, pack of 1

Riferimento: 341/418

Reinforcements for skis Lama 1:4

Riferimento: 341/509

BTP Lama 1:5

dimensions: main part: 9.5 x 4.95 x 6.4 cm6-part

Riferimento: 341/406

Scatola Fusibili Electric Box Lama 1:4

dimensions: 12.6 x 7 x 4.3 cm2-part

Riferimento: 340/13

Finta trasmissione

This dummy power unit can be installed on turbine powered helicopters to produce an even more realistic intersection between the turbine and the gearbox.When the imitation rotor brake of the dummy part is pushed over the turbine starter, the rubber connector is spring-loaded in front of the gearbox connection; retaining screws are not required.Dummy power...

Riferimento: 330/36

Fissaggio magnetico

If you don't want that the doors of the Lama canopy close itself after opening, you use these magnet latches.

Riferimento: 330/2

Imitazione turbina

The dummy turbine provides the ideal starting point if you wish to install additional scale fittings on your Lama.The dummy turbine is assembled from six separate GRP mouldings, and fits all models with VR-22 mechanics installed.In the turbine-powered version of the Lama the actual turbine is located in this position.GRP dummy turbineLength approx. 490 mm

Riferimento: 341/408

Serbatoio Olio piccolo, Lama, 1:4

dimensions: 6.8 x 1.8 x 6.8 cm

Riferimento: 341/403

Per Lama, 1:4

dimensions: 6 x 8.2 x 0.5 cm2-part

Riferimento: 341/402

Filtro, Lama 1:4

dimensions: 4.3 x 2.5 cm, inner diameter: 1.43 cm

Riferimento: 341/411

Llama estabilización trasera 1: 4

Riferimento: 341/424

Kick bar llama 2 partes 1: 4

Riferimento: 350/17

Coperchio scarico Ø 90 mm

When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...