O-Ringe für Tank 26/10, 1x4mm für Methanol

Référence: 13/32

Systéme de remplissage pour kérosène

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Référence: 10/66

Absperrhahn mit Feinsieb für Methanol

Référence: 26/34

Collier essence - kérosène

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Référence: 13/25

Válvula de llenado para metanol y bencina

Référence: 26/25

Filtre pour prise d'air du réservoir

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Référence: 7/26

Tankflasche mit Zubehör

Référence: 26/70

Réservoir en Kevlar 2.8 l pour Kérosène et pétrole

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...

Référence: 10/83

Bride de fixation

Content of the package: 4 pieces

Référence: 26/5

Réservoir pour Kérosène 1,25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Référence: 791/27

Réservoir intérieur pour Cobra 2,2 l

The internal fueltank for our model of the Cobra enables the builder to produce a military version of the machine.The capacity of 2.2 l. gives flight times of around 12 - 14 minutes.

Référence: 26/13

Fuel tank clunk big

Not available

Référence: 10/82-10

Schlauch für Methanol 10 mOrd.No. 10/82-10

Référence: 830/24

Prise de remplissage M5, coudée

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Référence: 830/83-50

Durite d'essence, rouleau 50 m

Fuel tubing for petrolapprox. 50 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems!

Référence: 412/26

Réservoir pour Kérosène 2 l pour Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Référence: 641/26

Réservoir Air-Crane, en GFK, version pour réacteur

Component part for fuselage Air-Crane, Ord.No. 6410