Distanzbuchse 12 x 18 x 6 mm

Riferimento: 71/6

Bush 4 x 6 x 27.7 mm

Pack of 2

Riferimento: 830/44

Transverse link petrol mechanics

Transverse link petrol mechanics. Content of the package: 2 pieces.

Riferimento: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Riferimento: 607/53

Set plato ciclico BO 105 T-Rex

Riferimento: 107/14

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces.

Riferimento: 945/54

Dome fittings set 4-blade Logo 800

Not available

Riferimento: 240/54

plate for swashplate guide

aluminum

Riferimento: 260/8

Bush 4 x 6 x 9.2 mm

Pack of 2

Riferimento: 834/53

Piastra di base per BENZIN Acrobatic

The rugged aluminium base plate accommodates the complete mechanics assembly of the Acrobatic trainer. For the installation and removal of the engine it is not essential to dismantle the base plate from the side frames.

Riferimento: 36/6

Mozzo per rotore di coda azionato

Hub for driven tail rotor.

Riferimento: 722/54

Bearing support 21 mm

Not available

Riferimento: 871/37

Freewheel washer 10 x 15,5 x 3,8 mm

 Content of the package1 piece

Riferimento: 105/41

Strut holder, square bar

Strut holder, square bar, aluminium Content of the package: 1 piece

Riferimento: 103/25

Bush 3.1 x 8 x 17.2 mm

Pack of 2

Riferimento: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Riferimento: 53/17

Dome fittings set for PHT3-3

Dome fittings set for JetCat PHT3-3 turbine