Startseite
Marken

Keine Marke

Lieferanten
Verkaufshits
Alle Verkaufshits

Bush 5 x 8 x 2.5 mm

94/11
Bewertung 
4,60 €
Bruttopreis
Menge
Verkauf auf Anfrage

 

Política de seguridad

 

Política de envío

 

Política de devolución

Beschreibung
Cojinete 5 x 8 x 2.5 mm
Artikeldetails
94/11
Bewertungen

Aktuell keine Kunden-Kommentare

Eigenen Kommentar verfassen

Bush 5 x 8 x 2.5 mm

Bush 5 x 8 x 2.5 mm

Eigenen Kommentar verfassen
16 autres produits dans la même catégorie :
Douille 10 x 14 x 2,5 mm Aperçu rapide

Référence: 36/11

Douille 10 x 14 x 2,5 mm

Commentaire(s): 0

The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2

Prix 11,20 €
Détails
En vente sur demande
Reinforced freewheel bell... Aperçu rapide

Référence: 36/40

Reinforced freewheel bell compl.

Commentaire(s): 0

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Prix 131,70 €
Détails
En vente sur demande
Bellcrank set 60 degree Aperçu rapide

Référence: 61/20

Bellcrank set 60 degree

Commentaire(s): 0

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Prix 32,30 €
Détails
En vente sur demande
Clamp ring 12 mm for rotor... Aperçu rapide

Référence: 54/14

Clamp ring 12 mm for rotor shaft

Commentaire(s): 0

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Prix 32,30 €
Détails
En vente sur demande
Clamp ring 10 mm diameter... Aperçu rapide

Référence: 54/9

Clamp ring 10 mm diameter rotor shaft

Commentaire(s): 0

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Prix 27,40 €
Détails
En vente sur demande

Folgen Sie uns auf Facebook

Facebook