Heat shrink sleeve set

Référence: 11/0

Allen key set, 7-part

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Référence: 11/41

Pin, for applying thread lock

A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again.

Référence: 10/367

Lubricant set

All mechanics require the correct lubrication: not too much and not too little. If friction is low, the rate of wear is reduced. This lubricant set includes both lubricants required for complete protection of the mechanics. When re-greasing check carefully that no grit is allowed into the lubricant (abrasive effect), and clean all parts before...

Référence: 23/10

Threadlocker

Référence: M11/7

Llave de tubo para tensores de cadena

Référence: 11/39

Fine-point screwdriver set

The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...