Alu-Heckrohr 31x1200mm fixlang

Référence: 49/1

Glocke mit Stellring

Référence: 139/13

Tail boom 25 x 910 mm

Not available

Référence: 21/10

Steuerstange 2 x 1000 mm, Stahl

Référence: 809/13

Poutre AC 20 x 0,8 x 780 mm noir

 Aluminium tail boom0.8 mm wall thickness20 mm outside Øwith guides for 2 mm tail rotor shaft.

Référence: 314

Tube AC 25 x 0,8 x 790 mm, violet

Tail boomdimensions: 25 x 0.8 x 790 mmblack

Référence: 17/68

Mittenlagerungs-Set 25 mm

Référence: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Référence: 834/70

Support de poutre, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Référence: 305

Tube AC 20 x 0,8 x 780 mm, noir

 Tail boom20 x 0.8 x 780 mmblack

Référence: 429/13

Tail boom Bell 429 25x1180mm

Not available

Référence: 313

Tube AC 20 x 0,5 x 790 mm, noir

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Référence: 800/12

Steuerdrahtführung, 3-teilig

Référence: 304

Tube AC 20 x 0,8 x 780 mm, argent

 Tail boom20 x 0.8 x 780 mmsilver

Référence: 800/38

Führung für 25 mm Heckrohr

Référence: 8/6

Heckservo-Halter 20 mm

Référence: 17/69

Palier central

Sleeve for centre bearing pack of 2