Zahnrad 17 mm, 54 Zähne

Reference: 4/30

90° Nippel mit Zollgewinde

Reference: 870/52

longitudinal carrier, GFK

Not available

Reference: 870/6

Gyro plate GFK, X-Treme

Not available

Reference: 809/51

SkyFox right side frame

Not available

Reference: 42

Bevel gear 6 mm, 16-tooth

 Bevel gear 6 mm16-toothmodule 0.7

Reference: 871/22

Gear 8 mm, 22 teeth

Not available

Reference: 1006/10

Main gear box

The main gearbox is responsible for driving the main and tail rotors. To complete the main gearbox you will need to select a gear with the appropriate number of teeth to match your clutch, and also a gearbox connection which mates with your existing tail rotor drive system.Main gearbox, kit-form. The pinion shaft 41/25 supplied is only suitable for use...

Reference: 870/73

Side plate X-Treme, CFK

Not available

Reference: 833/44

Toothed belt pulley 55-tooth 3M

Toothed belt pulley 55-tooth.

Reference: 44/45

Gear 58-tooth

Gear 58-tooth Delrin The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 871/102

Main gear, 102 teeth

Not available

Reference: 870/50

Front vertical frame, X-Treme

Not available

Reference: 44/10

Gear 55-tooth

Gear 55-tooth GRP The illustration shows a symbol with the number of teeth of the main gear. The number next to the back slash shows the number of teeth for the appropriate clutch and the resulting gear ratio.

Reference: 37/10

Gearbox housing incl cover

Even though the main gearbox is placed in the centre of the mechanics it is easily accessible for maintenance. For visual checks of gear meshing clearance, and for greasing the main gearbox it is provided with a gearbox cover.

Reference: 870/53

Bearing plate, GFK

Not available

Reference: 44/58

Gear 52-tooth

The combination of 52 : 32 teeth is used for the Sky Fox Boxer model, driven by a 4-stroke boxer motor with 2 x 13.26 cc capacity. 2-stroke glow plug engines (which are fitting our models because of performance and dimensions), don't achieve a satisfying result with this gear ratio.The illustration shows a symbol with the number of teeth of the main gear....