Stabiliser set Ecureuil

Aperçu rapide

Référence: 11/66

Crankshaft nut socket spanner 10 mm

Commentaire(s): 0

If you want to tighten the crankshaft nut on your engine fully, and still be able to loosen it again without problems, you need the correct size of crankshaft socket spanner. Note, however, that different engines require different sizes, so take care to order the correct item. Crankshaft nut socket spanner 10 mm, for O.S.

Prix 23,90 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 94/17

Thrust bearing 7 x 13 x 4.5 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 7 x 13 x 4.5...

Prix 25,10 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/8

12 x 28 x 8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 28 x 8 mmpack of...

Prix 14,80 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 38

Bearing 6 x 15 x 5 mm

Commentaire(s): 0

Not available

Prix 13,50 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 75/1

10 x 26 x 8 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 10 x 26 x 8 mmpack of...

Prix 17,00 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 64/19

15 x 24 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 15 x 24 x 5 mmpack of...

Prix 17,00 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 68/2

20 x 32 x 7 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 20 x 32 x 7 mmpack of 1 

Prix 21,80 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 64/32

pinion gear 23-tooth

Commentaire(s): 0

Clutch pinion gearincl. flywheel and split taper collet23-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prix 98,90 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 715/80

Steel manifold for Mizar

Commentaire(s): 0

 Steel manifold for Mizar with petrol engine34 mm hole spacinge.g. for ZG22 or G230

Prix 94,20 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/7

Thrust bearing 12 x 25 x 6 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness.Thrust bearing12 x 25 x 6 mm3-part

Prix 19,40 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/1

10 x 19 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 10 x 19 x 5 mmpack of...

Prix 13,50 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 10/38

Penetrating oil

Commentaire(s): 0

When flying in moist air or rainy conditions you may find that rust starts to form on shafts. If this happens you could find that the swashplate is stuck fast the following day. A quick spray of penetrating oil will prevent oxidation getting a hold on the swashplate. Use it on the main rotor shaft and tail rotor shaft after flying; a few little squirts...

Prix 13,40 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/2

Bearing 8 x 19 x 6 mm

Commentaire(s): 0

Not available

Prix 13,50 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 4302

Bougie Enya 6

Commentaire(s): 0

Contenu du paquet 1 piècemoteur chaud - bougie froide (été) moteur froid - bougie chaude (hiver)

Prix 25,10 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/3

Thrust bearing 10 x 25 x 6 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness.Thrust bearing 10 x 25 x 6...

Prix 19,40 €

 Ajouter au panier

Détails

 En vente sur demande

Aperçu rapide

Référence: 55/6

12 x 21 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 12 x 21 x 5 mmpack of...

Prix 17,00 €

 Ajouter au panier

Détails

 En vente sur demande