Startseite
Marken

Keine Marke

Lieferanten
Verkaufshits
Alle Verkaufshits

Tuned pipe silencer

116/71
Bewertung 
176,40 €
Bruttopreis
Menge
Verkauf auf Anfrage

 

Política de seguridad

 

Política de envío

 

Política de devolución

Beschreibung
Pipa de Escape
Artikeldetails
116/71
Bewertungen

Aktuell keine Kunden-Kommentare

Eigenen Kommentar verfassen

Tuned pipe silencer

Tuned pipe silencer

Eigenen Kommentar verfassen
16 autres produits dans la même catégorie :
Manifold 34 mm Aperçu rapide

Référence: 116/98

Manifold 34 mm

Commentaire(s): 0

The various exhaust manifolds differ in shape and in the size of the flange, to match different engines' exhaust stubs. The term "exhaust hole spacing" refers to the holes on either side of the exhaust port, measured between hole centres.Please check before you order that you have selected the correct manifold to match your model and engine. Measure again...

Prix 131,70 €
Détails
En vente sur demande
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Bougie Enya 6 Aperçu rapide

Référence: 4302

Bougie Enya 6

Commentaire(s): 0

Contenu du paquet 1 piècemoteur chaud - bougie froide (été) moteur froid - bougie chaude (hiver)

Prix 25,10 €
Détails
En vente sur demande
Thrust bearing 10 x 25 x 6 mm Aperçu rapide

Référence: 55/3

Thrust bearing 10 x 25 x 6 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness.Thrust bearing 10 x 25 x 6...

Prix 19,40 €
Détails
En vente sur demande
8 x 16 x 6 mm Aperçu rapide

Référence: 7/37

8 x 16 x 6 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 8 x 16 x 6 mmpack of...

Prix 12,80 €
Détails
En vente sur demande
Spray can holder Aperçu rapide

Référence: 16/3

Spray can holder

Commentaire(s): 0

This spray can holder can be used with any spray can, and makes it easier to apply the paint evenly. The holder provides an effective means of controlling the spray coat; an additional advantage is that your hands stay clean, as they don't make contact with the paint.

Prix 11,90 €
Détails
En vente sur demande
Flanged ballrace 4 x 9 x 4 mm Aperçu rapide

Référence: 35/13

Flanged ballrace 4 x 9 x 4 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
6 x 16 x 5 mm Aperçu rapide

Référence: 7/17

6 x 16 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 6 x 16 x 5 mmpack of...

Prix 11,70 €
Détails
En vente sur demande
8 x 22 x 7 mm Aperçu rapide

Référence: 39

8 x 22 x 7 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Ballrace 8 x 22 x 7 mmpack of...

Prix 13,50 €
Détails
En vente sur demande
Thrust bearing 10 x 24 x 9 mm Aperçu rapide

Référence: 117/2

Thrust bearing 10 x 24 x 9 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 10 x 24 x 9...

Prix 30,60 €
Détails
En vente sur demande
Thrust bearing 4 x 10 x 3 mm Aperçu rapide

Référence: 94/3

Thrust bearing 4 x 10 x 3 mm

Commentaire(s): 0

High centrifugal forces cannot be absorbed by a radial bearing. For that application we use a 3-part thrust bearing (axial bearing) consisting of a loose ring, a ball cage and a fixed ring: the parts are installed in this sequence. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness.  Thrust bearing 4 x 10 x 3...

Prix 11,70 €
Détails
En vente sur demande

Folgen Sie uns auf Facebook

Facebook