Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 71/20
Pitch compensator, complete, for 10 mm ∅ main shaft, centre piece GRP
Reference: 704/33
Component part for a multi-blade rotor head for 12 mm Ø main shaft; see Ord.No. 703/32, 704/32 resp. 705/32.
Reference: 74/11
O-ring 1,5 x 11 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 82/32
Washer for variable rocker 4 mmContent of the package: 2 pieces
Reference: 71/27
Pivot pin with circlipContent of the package 2 pieces
Reference: 76/16
As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads
Reference: 832/74
O-ring 9 x 4.5 mm Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 54/18
Same design as clamp ring 54/13, but for 12 mm Ø main rotor shaft.Clamp ring for pitch compensator 12 mm Ø, length of the pin 40 mm.
Reference: 79
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Reference: 832/70
Mixer arms, aluminium Content of the package: 2 pieces
Reference: 72/45
Aluminium centre piece for 12 mm Ø main shaft
Reference: 71/18
Content of the package2 pieces
Reference: 71 A
Centre piece for pitchcompensator, GFK, alone.
