Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
la-palanca-acodada-alu
No hay reseñas de clientes en este momento.
Référence: 86/10
Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker.Ball collet 5 mm Ø, pack of 2, chrome-plated.
Référence: 832/72
Aluminium centre piece for rotor head 722/72.
Référence: 82/19
Aluminium rocker for Delta head, 5 mm ∅, alone.
Référence: 117/20
The standard version of our mechanics includes ground thrust bearing shafts with a of 8 mm Ø and a length of 110 mm.Thrust bearings absorb the high centrifugal forces exerted by the main rotor blades. The effect of the axial bearings is retained in full when the blade holders rotate.Thrust bearing set, complete as shown.
Référence: 702/90
Aluminium centre piece for 12 mm Ø main shaft
Référence: 74/5
O-ring 3 x 7 mm soft Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Référence: 74/14
O-ring 3 x 16 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Référence: 82/54
Stabilizer rods 4 x 120 mm Content of the package: 2 pieces
Référence: 74/21
O-ring 3.5 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Référence: 78/41
Mixer lever, content of the package 1 piece.Additionial accessories for the use of mixer levers are either two flanged ballraces or two flanged bushes from Delrin as a low cost alternative. The screwing on the blade holder arm complies with the kind of hole, i.e. it depends on the through hole or on the blind hole. Please note for choosing the screws:...
Référence: 72/22
Aluminium centre piece, rigid, for 12 mm main shaft
Référence: 87/4
A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces
Référence: 76/9
Blade holder arm, aluminium. Content of the package: 1 piece.
Référence: 87/21
Washer for actuator arm Content of the package: 2 pieces
Référence: 82/53
Washer 3.5 x 12 x 3 mm, rubber Content of the package: 2 pieces
