Soporte de cabina de 47 mm

Reference: 875/1

Decal sheet X-Treme economic

Reference: 10/90

Canopy latch

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Reference: 809/1

Decal sheet Sky Fox

Reference: 860/1

Decal sheet X-Perience

Reference: 855/1

Decal sheet Sky Fox SX

Reference: 830/1

Decal sheet Benzin Trainer

Reference: 260/62

Rear canopy holder XLV

Rear canopy holder XLV.

Reference: 800/40

Quick-release canopy set

One of the main reasons for the popularity of the "trainer" type of model helicopters is their excellent all-round access to the mechanics once the canopy has been removed.The icing on the cake is to fit our quick-release canopy retainers, because then you don't even need to use screws to retain the canopy. The three small openings in the centre and on...

Reference: 808/4

Canopy holder 36 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.

Reference: 800/39

Sliding cabin holder, alone

Sliding cabin holder, alone.

Reference: 800/42

Canopy ball-end bolts M 4

 Content of the package 2 piecesComponent part for the quick-release canopy set Ord.No. 800/40

Reference: 800/41

Canopy ball-end bolts M 3

 Content of the package 2 piecesComponent part for the quick-release canopy set Ord.No. 800/40

Reference: 871/1

Decal sheet X-Treme

Reference: 260/61

Support for canopy holder XLV

Support for canopy holder XLV.

Reference: 260/60

Front canopy holder XLV

Front canopy holder XLV.

Reference: 808/5

Canopy holder 37 mm

The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.