Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 791/200
Tail drive belt kit for Cobra with Turbine
Reference: 307/53
Swashplate / driver / mast lock / plus rods needed for fitting the 3 blade rotor head on the Lama with T-Rex 700E mechanics
Reference: 830/50
Side frame for petrol mechanics. The two side frames are identical in size an shape. Content of the package: 1 piece.
Reference: 36/11
The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2
Reference: 105/42
Connecting elbow, aluminium Content of the package: 2 pieces
Reference: 53/6
If you are a fan of scale construction you won't be disappointed in the Alouette II. The model version of the gearbox housing is a reproduction of the full-size machine.The main gearbox dome is fitted in place of the dome plate supplied with the mechanics. The same ballrace is used, i.e. Ord.No. 55/5 - 10 x 21 x 5 mm.The greater size and height of the...
Reference: 61/20
The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...
