Cojinete 3 x 4 x 12.1 mm

Reference: 722/49

Tube drive adapter for shaft 8 mm

Content of the package: 1 piece

Reference: 57/20

Pitch-axis crank set

 Content of the packagecomplete as shown

Reference: 1006/15

Aluminium main gear box

This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.

Reference: 603/42

Mechanics support, rear

Mechanics support, rear, aluminium Content of the package: 2 piece

Reference: 105/43

Upper mechanics support

Strut holder, square bar, aluminium Content of the package: 2 piece

Reference: 105/49

Coupling pad Ø10

Ø10 x 2,5 mmContent of the package: 2 pieces

Reference: 808/60

Electric side frames, carbon

Electric side frames, carbon, complete with accessories

Reference: 54/14

Clamp ring 12 mm for rotor shaft

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Reference: 907/49

Bush 3.1 x 8 x 10 mm

Pack of 2

Reference: 94/4

Bush 6 x 7 x 17.5 mm

 Bush 6 x 7 x 17.5 mmpack of 1

Reference: 107/44

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.

Reference: 830/19

Bush 8 x 12 x 10.5 mm

Pack of 1

Reference: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Reference: 53/20

Dome fittings set Alouette II PHT2

Swashplate + fittings

Reference: 330/15

Bush 5 x 7 x 3.7 mm

Pack of 2

Reference: 15/7

Eje intermedio