Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Pack of 2
Política de seguridad
Política de envío
Política de devolución
Pack of 2
No hay reseñas de clientes en este momento.
Reference: 53/18
Swashplate/main shaft adaptor for GPH 70 turbine
Reference: 53
At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.
Reference: 107/44
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.
Reference: 54/14
The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø
Reference: 53/17
Dome fittings set for JetCat PHT3-3 turbine
Reference: 36/4
The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....
Reference: 830/56
Mechanics spacer al., front. Content of the package: 1 piece.
Reference: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...
Reference: 307/53
Swashplate / driver / mast lock / plus rods needed for fitting the 3 blade rotor head on the Lama with T-Rex 700E mechanics
Pack of 2
