
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 412/15
For Bell 412, Ord.No. 4125 when using JetCat PHT2 turbine
Référence: 54/9
Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter
Référence: 307/53
Swashplate / driver / mast lock / plus rods needed for fitting the 3 blade rotor head on the Lama with T-Rex 700E mechanics
Référence: 722/49
Content of the package: 1 piece
Référence: 53/6
If you are a fan of scale construction you won't be disappointed in the Alouette II. The model version of the gearbox housing is a reproduction of the full-size machine.The main gearbox dome is fitted in place of the dome plate supplied with the mechanics. The same ballrace is used, i.e. Ord.No. 55/5 - 10 x 21 x 5 mm.The greater size and height of the...
Référence: 49/16
If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out. Retaining springpack of 2
Référence: 132/38
These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft (Ord.No. 134/37) has to be increased. Bracket for speed-up gearboxPack of 2, incl. mounting material