Set de accesorios para 5 palas Logo 800

Riferimento: 42/18

Bevel gear 6 mm, 19-tooth

 Bevel gear6 mm Ømodule 0.719-tooth

Riferimento: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Riferimento: 53/20

Dome fittings set Alouette II PHT2

Swashplate + fittings

Riferimento: 107/14

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces.

Riferimento: 641/54

Bearing support 19 mm

Not available

Riferimento: 802/64

32-tooth clutch bell

 32-tooth clutch belldouble ballracedincluding lining

Riferimento: 36/40

Reinforced freewheel bell compl.

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Riferimento: 1006/15

Scatola ingranaggi principale in alluminio

This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.

Riferimento: 268/36

Freewheel for 15 mm shaft

for XLC

Riferimento: 15/7

Eje intermedio

Riferimento: 470/53

Struttura inferiore Bell 47 G III meccanica

Bottom structure Bell 47 G III mechanics.

Riferimento: 105/53

Mechanics support plate

Mechanics support plate, aluminium Content of the package: 1 piece

Riferimento: 49/53

Bush 5 x 8 x 5 mm

Not available

Riferimento: 870/200

R. H. conversion set X-Treme

For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.

Riferimento: 49/16

Retaining spring

If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out.  Retaining springpack of 2

Riferimento: 907/53

Struttura inferiore per MD 520 N

Component part for mechanics Ord.No. 1002/27