
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 830/44
Transverse link petrol mechanics. Content of the package: 2 pieces.
Reference: 722/9
The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed...
Reference: 107/42
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.
Reference: 61/20
The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...
Reference: 860/64
Toothed belt clutch bell, aluminium36-toothtwin ballracedincl. clutch lining
Reference: 53/17
Dome fittings set for JetCat PHT3-3 turbine
Reference: 53
At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.