

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Hub de engranajes 130 dientes
Política de seguridad
Política de envío
Política de devolución
Hub de engranajes 130 dientes
No hay reseñas de clientes en este momento.
Reference: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...
Reference: 36/4
The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....
Reference: 870/22
Lay shaft8 Ø x 107 mmuse with driven tail rotor for auto-rotation
Reference: 105/53
Mechanics support plate, aluminium Content of the package: 1 piece
Reference: 1002/32
If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.
Hub de engranajes 130 dientes