Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 53/19
Dome fittings set for JetCat PHT3-L turbine
Référence: 830/66
Set in carbon fiber, complete as illustrated
Référence: 53
At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.
Référence: 61/20
The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...
Référence: 870/20
Circlip for 8 mm Ø shaftpack of 2
Référence: 1006/15
This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.
Référence: 870/200
For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.
