Escuadra para elevador

Riferimento: 808/60

Electric side frames, carbon

Electric side frames, carbon, complete with accessories

Riferimento: 107/13

Balls chrome-plated 2.5 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Riferimento: 15/7

Eje intermedio

Riferimento: 830/66

RC-front structure petrol mechanics

Set in carbon fiber, complete as illustrated

Riferimento: 871/37

Freewheel washer 10 x 15,5 x 3,8 mm

 Content of the package1 piece

Riferimento: 307/53

Dome fittings set Lama T-Rex 700E

Swashplate / driver / mast lock / plus rods needed for fitting the 3 blade rotor head on the Lama with T-Rex 700E mechanics

Riferimento: 260/3

Tail rotor holder

Tail rotor holder XLV.

Riferimento: 94/7

Bush 5 x 6 x 13.6 mm

Not available

Riferimento: 340/49

Tube drive adapter for shaft 10 mm

Content of the package: 1 piece

Riferimento: 49/16

Retaining spring

If your helicopter accidentally makes ground contact, the claw coupling may disengage, and the cruciform element may be lost. Fitting an annular retaining spring ensures exact alignment of the claw coupling, and prevents the cruciform element slipping out.  Retaining springpack of 2

Riferimento: 54/14

Clamp ring 12 mm for rotor shaft

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Riferimento: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Riferimento: 722/54

Bearing support 21 mm

Not available

Riferimento: 49/55

Yoke connector, shaft 5 mm

This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft

Riferimento: 105/49

Giunto per tampone Ø10

Ø10 x 2,5 mmContent of the package: 2 pieces

Riferimento: 870/15

Lay shaft 8 x 107 mm

 Lay shaft8 Ø x 107 mm