

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Tubo de cola curvada
Política de seguridad
Política de envío
Política de devolución
Tubo de cola curvada
No hay reseñas de clientes en este momento.
Référence: 310/25
Engines with rear exhaust enable the installation of the tuned pipe underneath the mechanics of a trainer helicopter, mounted at the mechanics.Depending on the kind of the engine the sizes of the tuned pipes vary in size. The difference of these sets is due to the diameter of the fastening clamp.Tuned pipe holderset suitable for tuned pipe 116/33
Référence: 310/3
The shape of a fuselage is not always correct to support the tuned pipe at the exit (e.g. model Tiger).Tuned pipe holder for fuselagesset suitable for tuned pipe 116/33
Référence: 310/12
Engines with rear exhaust enable the installation of the tuned pipe underneath the mechanics of a trainer helicopter, mounted at the mechanics.Depending on the kind of the engine the sizes of the tuned pipes vary in size. The difference of these sets is due to the diameter of the fastening clamp.Tuned pipe holderset suitable for tuned pipe 116/16
Référence: 310/1
GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Ord.No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 25 mm Ø tail boom
Référence: 310/2
The shape of a fuselage is not always correct to support the tuned pipe at the exit (e.g. model Tiger).Tuned pipe holder for fuselagesset suitable for tuned pipe 116/16
Tubo de cola curvada