Set electrico de motor para mecanica electrica Benzin, 10S

Référence: 3308/10

Kontronik Pyro 700-52 L

Specifications:520 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz3 kW25 mΩ Ri

Référence: 3322

Kit propulsion électrique pour Lama 1,80 m

Not available

Référence: 3314/6

Propulsion électrique pour SkyFox 1500 mm 6S

kit content:electric motor Kontronik Pyro 700-52 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.

Référence: 3316

Kit moteur électrique pour Benzin Electric mécanique

Motor set for Electric mechanics Ord.No. 1002/80 and 1002/82For 1680 mm diameter multi blade or 1800 mm 2-blade, 10S LiPo

Référence: 3308/15

Kontronik Pyro 850-24 LOrd.No. 3308/15

240RPM/Vmax. 25000 RPM580 g>3 kW

Référence: 3320

Electric motor set for Electric Benzin mechanics

Not available

Référence: 3304

Kit propulsion électrique pour mécanique électro-turbine

Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....

Référence: 3312/6

Propulsion électrique pour SkyFox 1800 mm 6S

kit content:electric motor Kontronik Pyro 700-45 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.

Référence: 834/100

Kit transformation Benzin Acrobatic

So you own a Petrol Acrobatic 8304 and would like to install the mechanics in a BO 105?You will need to change the gearbox reduction ratio, and this can be accomplished with this conversion set, which also contains all the other accessory items you require.Petrol Acrobatic conversion set, for converting 8304 mechanics into 1002/40.

Référence: 3308/9

Kontronik TelMe Futaba

The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...

Référence: 3302/4

Programmer V2Ord.No. 3302/4

Référence: 3307

Kit propulsion électrique pour mécanique benzin 12S

For the conversion of benzin mechanics to electric

Référence: 59/11

Motorträger

Référence: 3311

Kit propulsion électrique pour trainer X-Treme

For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...

Référence: 3340

Brushless motor set Starwood Lama

Motor, gear, fan & clutch, without ESCfor 12 S

Référence: 3310

Kit propulsion électrique pour mécanique X-Treme

For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set). Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixings Due to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...