

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 3308/15
Specifications:235 RPM/VMax. 25,000 RPM8 mm shaft14 poles55 mm free shaft length575 g / 20.3 oz3.5 kW39 mΩ Ri
Reference: 3304
Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....
Reference: 3308/11
Specifications:400 RPM/VMax. 30,000 RPM8 mm shaft14 poles55 mm free shaft length500 g / 17.6 oz5 kW18 mΩ Ri
Reference: 3308/10
Specifications:520 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz3 kW25 mΩ Ri
Reference: 3306
Reference: 3311/1
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...
Reference: 3308/9
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...
Reference: 3309
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley,...