Patin para estabilizador de cola, negro

Reference: 7/10

Buttonholes for the assembly hall 3 x

 Content of the package2 pieces

Reference: 800/25

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.275 mm high118 g total weightscrew fitting to tail rotor holder

Reference: 802/24

Kühlluftschacht Boxer

Reference: 126/2

Skid reinforcement, carbon fibre

Not available

Reference: 834/41

Toothed belt, XL/190

Toothed belt for BENZIN Acrobatic.

Reference: 107/27

Ball-link curved

 Ball-linkcurvedpack of 6

Reference: 860/30

CFK-Rohr 8 x 6 x 700 mm

Reference: 809/7

Heckrohrhalter 20 mm

Reference: 722/39

Support for motor

Support for motor

Reference: 800/24

Stabiliser set large

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Reference: 107/28

Ball-link straight

 Ball-linkstraightpack of 6

Reference: 31/7

Inserto de soporte de pluma trasera

Reference: 30/7

Strut set fibra de carbono 8 x 200 mm

Reference: 260/10

Tail boom support

Tail boom support XLV.

Reference: 310/8

Tuned pipe holder 2-part

GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom

Reference: 870/4

Querverbinder, GFK