Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
Ersatzteil passend zum Trainerbausatz Ord.No. 8301.
No hay reseñas de clientes en este momento.
Riferimento: 800/37
The required length of the canopy holder is determined by the kind of canopy and the location of its fitting points on the side frames.
Riferimento: 800/19
Tail skids only. Create your own individual colour scheme: e.g. white stabiliser - red skid!
Riferimento: 260/17
Centre bearing setincluding 2 O-ringsexcluding ballrace
Riferimento: 800/23
Component part for stabiliser set, Ord.No. 800/25
Riferimento: 800/5
Instead of a horizontal fin (for mounting on the tail boom) the small inset horizontal panel replaces that. The inset fits on top of the stabiliser, outwards opposite of the tail rotor.220 mm high, excl. tail skid3-part, 45 g total weight
Riferimento: 310/8
GRP tuned pipe holders are used to secure the tuned pipe to the tail booms. They are easy to clamp in place. The tail pipe of the tuned pipe should be covered with silicone hose (Order No. 116/8), or with one of the tail pipes (Ord.No. 116/0 or 116/9), so that the heat of the pipe does not damage the holder.Tuned pipe holder, 2-partfor 20 mm ��tail boom
Riferimento: 870/105
Toothed belt, pitch 5for X-Treme trainer helicoptersWhen replacing a toothed belt please note that different toothed belts are used in X-Treme mechanics and X-Treme trainer helicopters.
