Conector para bujia de abordo

Reference: 115/5

PTFE pipe 20 x 2.5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/48

Starter cone

Component part for starter adaptor 67/41, 67/42 or 67/43.

Reference: 16/1

Heat-resistant matt black spray paint

This heat-resistant matt black spray paint is suitable for use on silencers, exhaust manifolds and turbine exhaust pipes. The paint is temperature-resistant to 600° C; even more importantly: it...

Reference: 28/13

Contact socket gold-plated

 Content of the package1 piece

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 64/52

Hexagon shaft 150 mm

Component part for the starter extension; see Ord.No. 64/46 resp. 64/50.

Reference: 115/14

Flex hose 12 x 240 mm

 Content of the package1 piece

Reference: 1020/20

Crankshaft nut 1/4" 28 UNF

 Content of the package1 piece

Reference: 67/16

Silicone ring for starter system

Silicone ring for starter system Ord.No. 67/13 pack of 1

Reference: 67/43

Starter adaptor for 1/4" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 870/45

Bush set X-Treme mechanics LH

 Content of the package4 x 16.8 mm4 x 27.9 mm4 x 33.5 mm

Reference: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Reference: 870/54

Belt tension roller bearer, X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Reference: 116/17

Flex hose screw fittings set

  Content of the package complete as shown

Reference: 7/68

Startadapter, GFK