Cable electrico de silicona

Reference: 28/13

Contact socket gold-plated

 Content of the package1 piece

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 4305

Glow plug cold

hot engine - cold plug (Summer) cold engine - hot plug (Winter)

Reference: 64/4

Propeller driver

 Content of the package1 piece

Reference: 870/44

Distanzhülsen X-Treme Mechanik

Reference: 115/14

Flex hose 12 x 240 mm

 Content of the package1 piece

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 67/16

Silicone ring for starter system

Silicone ring for starter system Ord.No. 67/13 pack of 1

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Reference: 67/45

Nut, 1/4" 28 UNF

 Content of the package1 piece

Reference: 802/48

Motor-Spezialmutter

Reference: 16/2

Silencer paint, black

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Reference: 64/50

Starter extension, 150 mm shaft

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Reference: 1065/1

Kurbelwellenmutter 5/16"Ord.No. 1065/1

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines