Hexagono de arranque con oneway , 150 mm eje

Reference: 28

Glow plug connector set

 Content of the packagecomplete as shown

Reference: 244505

Zylinderkopfdichtung R50 8,5ccOrd.No. 244505

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 28/9

Crocodile clip set

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip

Reference: 399

Engine running-in aid

Complete beginners preparing themselves and their new helicopter for their first attempts at flying are often faced with many and varied problems.For example: how can you run-in a new engine...

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Reference: 809/28

Glow plug socket holder

with opening for fuel tank nipple

Reference: 115/13

Flex hose 12 x 100 mm

 Content of the package1 piece

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 870/48

Alu-Lagerplatte

Reference: 870/54

Belt tension roller bearer, X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 870/39

Freilauf X-Treme, mitdrehender Heckrotor

Reference: 67/45

Nut, 1/4" 28 UNF

 Content of the package1 piece