Placa de tensado para correa, X-Treme

Référence: 116/17

Kit raccordement flexible

  Content of the package complete as shown

Référence: 1065/1

Kurbelwellenmutter 5/16"Ord.No. 1065/1

Référence: 28

Kit branchement bougie

 Content of the packagecomplete as shown

Référence: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Référence: 870/44

Distanzhülsen X-Treme Mechanik

Référence: 830/25

Flexschlauch für Kühlluftführung

Référence: 802/48

Motor-Spezialmutter

Référence: 115/11

Tube PTFE 20 x 2,5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Référence: 870/36

Roue libre X-Treme, 10 mm

 Content of the package1 piece

Référence: 28/15

Cordon de bougie monté 1,5 m

Glow plug cable, approx. 1.5 m, assembled

Référence: 67/43

Adaptateur de démarrage 1/4"-28 UNF

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Référence: 28/9

Branchement pince crocodile

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip

Référence: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Référence: 870/39

Freilauf X-Treme, mitdrehender Heckrotor

Référence: 67/41

Adaptateur de démarrage 5/16"

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Référence: 64/50

Rallonge de démarrage, tige 150 mm

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.