Tubo flexo

Reference: 870/39

Freilauf X-Treme, mitdrehender Heckrotor

Reference: 67/45

Nut, 1/4" 28 UNF

 Content of the package1 piece

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 64/66

Luftschrauben-Set

Reference: 67/48

Starter cone

Component part for starter adaptor 67/41, 67/42 or 67/43.

Reference: 16/1

Heat-resistant matt black spray paint

This heat-resistant matt black spray paint is suitable for use on silencers, exhaust manifolds and turbine exhaust pipes. The paint is temperature-resistant to 600° C; even more importantly: it...

Reference: 871/35

Blind hub, driven tail rotor R.H.

 Content of the package1 piece

Reference: 28/12

Contact plug gold-plated

 Content of the package1 piece

Reference: 7/69

Anlaßverlängerung mit 4-Kant

Reference: 16/2

Silencer paint, black

Silencers and tuned pipes become discoloured and un-sightly during the course of their hard life, but they can be revived with this special heat-resistant paint.The silencer paint also is designed to improve heat dissipation. Heat resistant up to 500° C.150 ml spray can

Reference: 116/97

Flex hose 120 mm dia 20 mm

 Content of the package1 piece

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 870/44

Distanzhülsen X-Treme Mechanik

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 802/48

Motor-Spezialmutter

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines